Fitzroy has developed the habit of sitting down at the top of the stairs, with his rump and hind legs on the landing, and his front paws on the first step.
Not only is it a comfortable position, but it allows my dog to meditate upon his next move, which will depend of course upon the next displacement of his master (me). Should Fitzroy scramble down to the ground floor? Or would he do better to remain on the upper floor, based upon the assumption that his master is merely visiting momentarily the second bedroom or the bathroom?
This photo reveals that everything in that vicinity is covered in a thick layer of white dust (which I've decided to ignore for the moment). The origins of that dust can be traced to the shiny metallic column seen behind Fitzroy in the following photo:
It's a tube of galvanized steel, 1.33 m long and 30 cm in diameter, incorporating an interior tube of stainless steel, 18 cm in diameter, which is the initial segment of a chimney for a future wood stove on the ground floor.
Here's a precise schema of the entire system that I'm building:
[Click to enlarge]
On the ground floor, I intend to install a French-manufactured
Invicta Sedan 10 cast-iron wood stove (which I don't intend to purchase until the chimney system is completed):
The stove (
poêle in French) will be placed on a step between the kitchen and the living room. For the passage of the stovepipe, 15 cm in diameter (shown in brown in my schema), I had to hack a hole in the massive slab of reinforced concrete (
dalle in French), 20 cm thick, between the ground and the upper floor. Here's a poor-quality photo (looking up at the ground-floor ceiling) that shows the present state of the completed hole:
The verb "hack" is quite appropriate, as I was obliged to work blindly with an assortment of diamond disc grinders, drills, chisels and hammers. And that explains the presence in the house of all the white dust. When I say that I worked "blindly", what I mean is that I didn't know with certainty, in the beginning, how to avoid damaging any vital beams in the slab (such as the one on the right, with a red line traced on it). In other words, I was obliged to perform my hacking solely in the region occupied by hollow-core concrete planks (with the typical grainy texture that you can see in the above photo). The initial problem, of course, was that the layout of the beams and planks was concealed behind a layer of plaster, which I first had to chip away. Naturally, once the stove is correctly installed, I'll be able to tidy up the rough edges of my hacking... but it's too early to worry about such trivial aspects of my construction project.
In the schema, you can see that I've been obliged to introduce a twist in the chimney tubes at the level of the first floor, just before it ascends into the attic (
grenier in French). That's because I encountered an unexpected obstacle when I pierced the suspended ceiling (
faux plafond in French) above the first floor: a huge reinforced concrete beam, whose vital role consists of helping to hold in place the ancient stone walls of the house.
The tube seen in the above photos with Fitzroy is therefore the first of a series of 8 or 9 elements leading up to the final object in the system: an external roof chimney. I've already ordered this object from the same excellent French manufacturer who makes all the stovepipes and tubes:
Poujoulat. Taking into account the inevitable delays due to tomorrow's Mayan end-of-the-world and the Christmas festivities, I would predict that my future wood stove should become operational at around the height of winter, some time in February. Up until then, I can rely, of course, on the good old open fireplace in the living room, whose major weakness is that it tends to warm only those parts of the body that are facing the flames, leaving you constantly with a chilly backside.
Talking of the fireplace, Fitzroy has developed another habit, which consists of waiting until I've lit up the fire and settled down in front of the flames with a good book, or to watch TV. Then, without asking for my opinion on the matter, Fitzroy scrambles up onto my knees and snuggles in for a warm snooze. If I try to push him back down onto the floor, my dog uses all the force of his powerful legs and claws to hang on tightly. So, I usually don't insist any further, preferring to take pleasure in Fitzroy's warm somnolent presence. He nevertheless becomes heavy after a while, and I have to guide carefully the mass of my sleeping dog back down onto the floor, where he sits upright, still half-asleep, with his head and paws supported by my knees and the tip of his backside poised on the floor. Finally, he wakes up completely, gets the message, and finds a new position outstretched on the floor. (Unfortunately, I can't supply readers with images of the delightful operations that I'm describing.)
Observers might say that I'm an excessively permissive master.
